Lint Steel is a notable, Manufacturer, Supplier and Stockist of Grade Mar M247 509 Round Bar. We make these products in a variety of sizes, dimensions, and thicknesses. We see to that only premium quality of raw material is been used so that, the quality of the product is also good.
High-quality MAR-M 509 and M247 steel is one of the steel grades we provide. Mar-M alloy 509 is an alloy designed for use at a higher temperature in a hostile atmosphere. We see to it that these bars are good to fit, by inspecting their physical, process, and productive characteristics.
This Mar-M alloy 509 Round Bar has a maximum chemical composition as follows: Iron is 2%, nickel is 11%, and cobalt is balanced; these are the fundamental components. In addition to these elements, this material also contains 4 % Titanium, 25% Chromium, 7% Zirconium, Tantalum, and Tungsten is 4% to 8%. In comparison to the Grades Mar-M alloy 509, MAR 247 Round Bar is a modified alloy exhibiting outstanding resistance to grain boundary cracking during casting, advanced complex cored, thin-wall airfoils, and enhanced carbide microstructure, carbide stability, and ductility. Aircraft/ Aviation, combustor, and exhaust, turbine engines components, high power turbine blades & vanes, integrated rotors & stators of an indigenous aircraft’s jet fuel starter are typical applications for Mar-M 247.
We have large warehouses in our factories to safely keep all of these highly-rated products. We are always concerned with adhering to the set of international and national standards, as well as the required specifications. The round bar is subjected to a variety of destructive and non-destructive testing by our quality control team. We execute these tests prior to delivering products, and only if the quality of the product meets the stated level, do we bundle these bars. We employ the fastest shipping service and provide safe delivery to our clients’ doorsteps within the given delivery dates.
| Size : | Dia3-120mm |
| Length : | 3 meter, Size: 1/2 inch |
| Form: | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
| Finish : | Cold drawn, Bright drawn, Centreless ground, Cold finished, Peeled and turned, Smooth turned, Slit rolled edge, Hot finished, Hot rolled, Rough turned/peeled, Peeled and reeled |
| Grade | C | Si | Mn | S | Cr | Ni | Mo | Co | W | Ti | Fe | Ta | Zr | B |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mar M509 | 0.55-0.65 | 0.10 max | 0.10 max | 0.015 max | 22.50-24.35 | 9.00-11.00 | – | Bal | 6.50-7.50 | 0.50 max | 2.00 max | 3.00-4.00 | 0.30-0.70 | 0.010 max |
| Grade | Cr | Co | Mo | W | Al | Ti | Ta | Hf | B | C | Zr | Ni |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MAR M247 | 8.0 | 10.0 | 0.7 | 10.0 | 6.0 | 1.0 | 3.0 | 1.0 | 0.015 | 0.15 | 0.05 | Bal |
| Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | HBW |
|---|---|---|---|---|---|---|
| 221 (≥) | 571 (≥) | 32 | 32 | 42 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 221 |
| Defence | Making arms and ammunition |
| Military | To produce Cold headed components |
| Automobile Industries to make nuts, bolts, shafts | Used in Agricultural sector |
| Manufacturing gears, bearings, and hinges | For Oil and Gas |
| Oil and Gas industry | Heavy engineering Industries |
| Dubai | Abu Dhabi | Sharjah | Ajman | Al Ain | Ajman |
| Fujairah | Umm al-Quwain | Cairo | Manama | Istanbul | Baghdad |
| Riyadh | Ankara | Alexandria | Jeddah | Jeddah | Damascus |
| Basra | New Cairo | Doha | Kuwait City | Beirut | Sana’a |
| Yas Island | Muscat | Erbil | Aleppo | Marrakesh | Sharjah |
| Moscow | London | Saint Petersburg | Berlin | Madrid | Kyiv |
| Rome | Bucharest | Paris | Minsk | Vienna | Hamburg |
| Warsaw | Budapest | Barcelona | Munich | Kharkiv | Milan |
| Belgrade | Prague | Nizhny Novgorod | Kazan | Sofia | Birmingham |
| Brussels | Samara | Ufa | Rostov-on-Don | Cologne | Voronezh |
| Perm | Volgograd | Odessa | Sydney | Melbourne | Brisbane |
| Perth | Adelaide | Canberra | Hobart | Darwin | Gold Coast |
| Auckland | Christchurch | Wellington | Hamilton | Tauranga | Dunedin |
| Sao Paulo | Lima | Bogota | Rio de Janeiro | Santiago | Caracas |
[popup_anything id=”2305″]
Head Office - Prasad chambers 912, 9th floor, Near Charni road station, Tata Road no. 2, Mumbai -400004.
Back Office - 32/34, Damodar Niwas, Second Floor, C. P. Tank, Mumbai 400004.
Copyright © 2016 Lint Steels, All Rights Reserved